Resources

Our parts quality consistently leads the industry because we have the most robust processes: all parts are rigorously tested, SpiderMall certified, and backed by our longtime Warranty. Our parts strike the best balance of cost, availability, function, reliability, and durability.

Accurate Location

Fit device without deviation and gap. For iPhone LCD screen parts, all are controlled within 2.17-2.25mm for iPhone products, make sure all items are a 100% perfect fit.

Bright Color Backlight

For iPhone parts, the brightness is controlled within the 500-550 lumens spectrum, same as the original. The cold-tone or the warm-tone can be customized. And all parts without static and light-leaking.

Sensitive Touch

Using the www.3Dtouchtest.com on iOS products, and the MultiTouch Tester on Andoird products, all the LCD screens are sensitivity tested.

High and Low Temperature Test Chamber

Via heating system: heat pipe stainless steel heater Refrigeration system: European and United States approved efficient energy-saving ultra-low temperature refrigeration system (air-cooled cooling) to test around 200H from -30℃ to 80℃ to improve the stably.

Flex Cable Bending Test

Superior material, each flex cable could bear 30 times resistance to bending test. Fix the test machine with the mobile phone chassis, set the clamshell angle and frequency. At least every 10,000 times after they remove the product for an electrical test to check the disconnection.

Oleophobic Coating

The glass is covered with oleophobic coating that prevents fingerprints and waterproof.

Strong Glass Cover & Bezel

As the LCD is thinner and thinner, the traditional hot press process can not adapt to this. So, with the three- axis dispenser, minimum Production capacity of 1500/10H, strong frame relying cold press process, glass cover and bezel attached together, which creates a perfect fitting phone to solve frame looseness and excessive glue problem. Although it requires more production time, and higher production cost, it will cut down the complaint that caused by bezel and cover separation.